Esto es lo que hay dentro del fichero:
[17179569.184000] Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[17179569.184000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved)
[17179569.184000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000001ff70000 (usable)
[17179569.184000] BIOS-e820: 000000001ff70000 - 000000001ff7c000 (ACPI data)
[17179569.184000] BIOS-e820: 000000001ff7c000 - 000000001ff80000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
[17179569.184000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[17179569.184000] BIOS-e820: 00000000fffff000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 511MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 130928
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 126832 pages, LIFO batch:31
[17179569.184000] DMI present.
[17179569.184000] ACPI: RSDP (v000 SENSX ) @ 0x000f7540
[17179569.184000] ACPI: RSDT (v001 SENSX AQUILA 0x06040000 SENS 0x00000000) @ 0x1ff77dd9
[17179569.184000] ACPI: FADT (v001 SENSX SENSX10 0x06040000 SENS 0x00000050) @ 0x1ff7bf64
[17179569.184000] ACPI: BOOT (v001 SENSX $SBFTBL$ 0x06040000 SENS 0x00000001) @ 0x1ff7bfd8
[17179569.184000] ACPI: SSDT (v001 INTEL EISTRef 0x00002000 INTL 0x20020725) @ 0x1ff77e09
[17179569.184000] ACPI: DSDT (v001 SENSX AQUILA 0x06040000 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x1008
[17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:df800000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda5 ro quiet splash locale=es_ES
[17179569.184000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic"
[17179569.184000] mapped APIC to ffffd000 (0140a000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[17179569.184000] Detected 1595.564 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179572.348000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179572.348000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179572.364000] Memory: 509288k/523712k available (1910k kernel code, 13840k reserved, 1070k data, 308k init, 0k highmem)
[17179572.364000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179572.444000] Calibrating delay using timer specific routine.. 3193.72 BogoMIPS (lpj=6387459)
[17179572.444000] Security Framework v1.0.0 initialized
[17179572.444000] SELinux: Disabled at boot.
[17179572.444000] Mount-cache hash table entries: 512
[17179572.444000] CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
[17179572.444000] CPU: After vendor identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
[17179572.444000] CPU: L1 I cache: 32K, L1 D cache: 32K
[17179572.444000] CPU: L2 cache: 1024K
[17179572.444000] CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00000040 00000180 00000000 00000000
[17179572.444000] Checking 'hlt' instruction... OK.
[17179572.460000] SMP alternatives: switching to UP code
[17179572.460000] Freeing SMP alternatives: 16k freed
[17179572.460000] checking if image is initramfs... it is
[17179573.052000] Freeing initrd memory: 5563k freed
[17179573.052000] ACPI: Core revision 20060707
[17179573.052000] ACPI: Looking for DSDT ... not found!
[17179573.052000] ACPI: setting ELCR to 0200 (from 0c20)
[17179573.056000] CPU0: Intel(R) Pentium(R) M processor 1600MHz stepping 05
[17179573.056000] SMP motherboard not detected.
[17179573.056000] Local APIC not detected. Using dummy APIC emulation.
[17179573.056000] Brought up 1 CPUs
[17179573.056000] migration_cost=0
[17179573.056000] NET: Registered protocol family 16
[17179573.056000] EISA bus registered
[17179573.056000] ACPI: bus type pci registered
[17179573.056000] PCI: PCI BIOS revision 2.10 entry at 0xfd9d3, last bus=2
[17179573.056000] PCI: Using configuration type 1
[17179573.056000] Setting up standard PCI resources
[17179573.080000] ACPI: Interpreter enabled
[17179573.080000] ACPI: Using PIC for interrupt routing
[17179573.084000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179573.084000] PCI: Probing PCI hardware (bus 00)
[17179573.084000] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[17179573.084000] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
[17179573.084000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[17179573.084000] Boot video device is 0000:01:00.0
[17179573.084000] PCI: Transparent bridge - 0000:00:1e.0
[17179573.084000] PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses'
[17179573.084000] Please report the result to linux-kernel to fix this permanently
[17179573.084000] PCI: Bus #07 (-#0a) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses'
[17179573.084000] Please report the result to linux-kernel to fix this permanently
[17179573.084000] ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
[17179573.092000] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.AGPB._PRT]
[17179573.092000] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCIB._PRT]
[17179573.092000] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
[17179573.092000] ACPI: PCI Interrupt Link [LNKB] (IRQs *11)
[17179573.092000] ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
[17179573.092000] ACPI: PCI Interrupt Link [LNKD] (IRQs *10)
[17179573.092000] ACPI: PCI Interrupt Link [LNKE] (IRQs *5)
[17179573.092000] ACPI: PCI Interrupt Link [LNKF] (IRQs 5) *0, disabled.
[17179573.092000] ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled.
[17179573.092000] ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
[17179573.092000] ACPI: Embedded Controller [H_EC] (gpe 28) interrupt mode.
[17179573.096000] ACPI: Power Resource [PFAN] (on)
[17179573.096000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179573.096000] pnp: PnP ACPI init
[17179573.096000] pnp: PnP ACPI: found 8 devices
[17179573.096000] PnPBIOS: Disabled by ACPI PNP
[17179573.096000] PCI: Using ACPI for IRQ routing
[17179573.096000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179573.104000] PCI: Bridge: 0000:00:01.0
[17179573.104000] IO window: disabled.
[17179573.104000] MEM window: c8000000-cfffffff
[17179573.104000] PREFETCH window: d8000000-dfffffff
[17179573.104000] PCI: Bus 3, cardbus bridge: 0000:02:03.0
[17179573.104000] IO window: 00003000-000030ff
[17179573.104000] IO window: 00003400-000034ff
[17179573.104000] PREFETCH window: 30000000-31ffffff
[17179573.104000] MEM window: 36000000-37ffffff
[17179573.104000] PCI: Bus 7, cardbus bridge: 0000:02:03.1
[17179573.104000] IO window: 00003800-000038ff
[17179573.104000] IO window: 00003c00-00003cff
[17179573.104000] PREFETCH window: 32000000-33ffffff
[17179573.104000] MEM window: 38000000-39ffffff
[17179573.104000] PCI: Bridge: 0000:00:1e.0
[17179573.104000] IO window: 3000-3fff
[17179573.104000] MEM window: d0000000-d00fffff
[17179573.104000] PREFETCH window: 30000000-33ffffff
[17179573.104000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179573.104000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[17179573.104000] PCI: setting IRQ 11 as level-triggered
[17179573.104000] ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[17179573.104000] PCI: Setting latency timer of device 0000:02:03.0 to 64
[17179573.104000] PCI: Enabling device 0000:02:03.1 (0000 -> 0003)
[17179573.104000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[17179573.104000] ACPI: PCI Interrupt 0000:02:03.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[17179573.104000] PCI: Setting latency timer of device 0000:02:03.1 to 64
[17179573.104000] NET: Registered protocol family 2
[17179573.136000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[17179573.136000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[17179573.136000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[17179573.136000] TCP: Hash tables configured (established 16384 bind 8192)
[17179573.136000] TCP reno registered
[17179573.136000] Simple Boot Flag at 0x36 set to 0x1
[17179573.136000] audit: initializing netlink socket (disabled)
[17179573.136000] audit(1164233006.136:1): initialized
[17179573.136000] VFS: Disk quotas dquot_6.5.1
[17179573.136000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179573.136000] Initializing Cryptographic API
[17179573.136000] io scheduler noop registered
[17179573.136000] io scheduler anticipatory registered
[17179573.136000] io scheduler deadline registered
[17179573.136000] io scheduler cfq registered (default)
[17179573.136000] isapnp: Scanning for PnP cards...
[17179573.488000] isapnp: No Plug & Play device found
[17179573.520000] Real Time Clock Driver v1.12ac
[17179573.520000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179573.520000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[17179573.520000] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[17179573.520000] mice: PS/2 mouse device common for all mice
[17179573.520000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179573.520000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179573.520000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179573.520000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179573.524000] i8042.c: Detected active multiplexing controller, rev 1.1.
[17179573.524000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[17179573.524000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[17179573.524000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[17179573.524000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[17179573.524000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179573.524000] EISA: Probing bus 0 at eisa.0
[17179573.524000] Cannot allocate resource for EISA slot 1
[17179573.524000] Cannot allocate resource for EISA slot 2
[17179573.524000] Cannot allocate resource for EISA slot 3
[17179573.524000] EISA: Detected 0 cards.
[17179573.524000] TCP bic registered
[17179573.524000] NET: Registered protocol family 1
[17179573.524000] NET: Registered protocol family 8
[17179573.524000] NET: Registered protocol family 20
[17179573.524000] Using IPI No-Shortcut mode
[17179573.524000] ACPI: (supports S0 S3 S4 S5)
[17179573.524000] Freeing unused kernel memory: 308k freed
[17179573.692000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179574.700000] Capability LSM initialized
[17179574.728000] ACPI: Fan [FAN0] (on)
[17179574.732000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[17179574.732000] ACPI: Processor [CPU0] (supports 8 throttling states)
[17179574.736000] ACPI: Thermal Zone [THRM] (45 C)
[17179575.008000] ICH4: IDE controller at PCI slot 0000:00:1f.1
[17179575.008000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[17179575.008000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[17179575.008000] PCI: setting IRQ 10 as level-triggered
[17179575.008000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[17179575.008000] ICH4: chipset revision 1
[17179575.008000] ICH4: not 100% native mode: will probe irqs later
[17179575.008000] ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda
io, hdb
io
[17179575.008000] ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc
io, hdd
io
[17179575.008000] Probing IDE interface ide0...
[17179575.296000] hda: TOSHIBA MK6021GAS, ATA DISK drive
[17179575.968000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179576.032000] Probing IDE interface ide1...
[17179576.768000] hdc: SAMSUNG CDRW/DVD SU-324B, ATAPI CD/DVD-ROM drive
[17179577.440000] ide1 at 0x170-0x177,0x376 on irq 15
[17179577.448000] hda: max request size: 128KiB
[17179577.456000] hda: 117210240 sectors (60011 M
, CHS=65535/16/63, UDMA(100)
[17179577.456000] hda: cache flushes supported
[17179577.456000] hda: hda1 hda2 < hda5 hda6 >
[17179577.596000] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179577.596000] Uniform CD-ROM driver Revision: 3.20
[17179577.960000] usbcore: registered new driver usbfs
[17179577.960000] usbcore: registered new driver hub
[17179577.960000] USB Universal Host Controller Interface driver v3.0
[17179577.960000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[17179577.960000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179577.960000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179577.960000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[17179577.960000] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
[17179577.960000] usb usb1: configuration #1 chosen from 1 choice
[17179577.960000] hub 1-0:1.0: USB hub found
[17179577.960000] hub 1-0:1.0: 2 ports detected
[17179578.036000] ieee1394: Initialized config rom entry `ip1394'
[17179578.064000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[17179578.064000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
[17179578.064000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179578.064000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179578.064000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[17179578.064000] uhci_hcd 0000:00:1d.1: irq 10, io base 0x00001820
[17179578.064000] usb usb2: configuration #1 chosen from 1 choice
[17179578.064000] hub 2-0:1.0: USB hub found
[17179578.064000] hub 2-0:1.0: 2 ports detected
[17179578.168000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[17179578.168000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179578.168000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179578.168000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[17179578.168000] uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001840
[17179578.168000] usb usb3: configuration #1 chosen from 1 choice
[17179578.168000] hub 3-0:1.0: USB hub found
[17179578.168000] hub 3-0:1.0: 2 ports detected
[17179578.272000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
[17179578.272000] PCI: setting IRQ 5 as level-triggered
[17179578.272000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 5 (level, low) -> IRQ 5
[17179578.272000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179578.272000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179578.272000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[17179578.272000] ehci_hcd 0000:00:1d.7: debug port 1
[17179578.272000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[17179578.272000] ehci_hcd 0000:00:1d.7: irq 5, io mem 0xc0000000
[17179578.276000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179578.276000] usb usb4: configuration #1 chosen from 1 choice
[17179578.276000] hub 4-0:1.0: USB hub found
[17179578.276000] hub 4-0:1.0: 6 ports detected
[17179578.380000] ACPI: PCI Interrupt 0000:02:03.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[17179578.440000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[d0003000-d00037ff] Max Packet=[2048] IR/IT contexts=[4/4]
[17179578.548000] Attempting manual resume
[17179578.612000] kjournald starting. Commit interval 5 seconds
[17179578.612000] EXT3-fs: mounted filesystem with ordered data mode.
[17179579.196000] usb 2-1: new low speed USB device using uhci_hcd and address 2
[17179579.348000] usb 2-1: configuration #1 chosen from 1 choice
[17179579.592000] usb 2-2: new full speed USB device using uhci_hcd and address 3
[17179579.720000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0000f04108013faf]
[17179579.756000] usb 2-2: configuration #1 chosen from 1 choice
[17179593.716000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179593.720000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179593.740000] hw_random: RNG not detected
[17179594.108000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x84cb1, caps: 0x804713/0x0
[17179594.144000] input: SynPS/2 Synaptics TouchPad as /class/input/input1
[17179594.248000] Linux agpgart interface v0.101 (c) Dave Jones
[17179594.252000] agpgart: Detected an Intel 855PM Chipset.
[17179594.268000] agpgart: AGP aperture is 256M @ 0xe0000000
[17179594.528000] ieee80211_crypt: registered algorithm 'NULL'
[17179594.544000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[17179594.544000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <
Esta dirección de correo electrónico está protegida contra los robots de spam, necesitas tener Javascript activado para poder verla
>
[17179594.580000] usbcore: registered new driver hiddev
[17179594.596000] b44.c:v1.00 (Apr 7, 2006)
[17179594.596000] ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
[17179594.600000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:00:f0:71:40:04
[17179594.600000] input: HID 062a:0000 as /class/input/input2
[17179594.600000] input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1d.1-1
[17179594.600000] usbcore: registered new driver usbhid
[17179594.600000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179594.608000] ts: Compaq touchscreen protocol output
[17179594.792000] ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[17179594.792000] Yenta: CardBus bridge found at 0000:02:03.0 [144d:c00f]
[17179594.808000] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
[17179594.808000] ipw2100: Copyright(c) 2003-2006 Intel Corporation
[17179594.920000] Yenta: ISA IRQ mask 0x0018, PCI irq 11
[17179594.920000] Socket status: 30000006
[17179594.920000] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
[17179594.920000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[17179594.920000] cs: IO port probe 0x3000-0x3fff: clean.
[17179594.920000] pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd00fffff
[17179594.920000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
[17179594.920000] ACPI: PCI Interrupt 0000:02:03.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[17179594.920000] Yenta: CardBus bridge found at 0000:02:03.1 [144d:c00f]
[17179595.048000] Yenta: ISA IRQ mask 0x0098, PCI irq 11
[17179595.048000] Socket status: 30000006
[17179595.048000] Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a
[17179595.048000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[17179595.048000] cs: IO port probe 0x3000-0x3fff: clean.
[17179595.048000] pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd00fffff
[17179595.048000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
[17179595.064000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[17179595.064000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[17179595.768000] cs: IO port probe 0x100-0x3af: clean.
[17179595.768000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[17179595.772000] cs: IO port probe 0x820-0x8ff: clean.
[17179595.772000] cs: IO port probe 0xc00-0xcf7: clean.
[17179595.772000] cs: IO port probe 0xa00-0xaff: clean.
[17179595.772000] cs: IO port probe 0x100-0x3af: clean.
[17179595.776000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[17179595.776000] cs: IO port probe 0x820-0x8ff: clean.
[17179595.776000] cs: IO port probe 0xc00-0xcf7: clean.
[17179595.776000] cs: IO port probe 0xa00-0xaff: clean.
[17179595.884000] intel8x0_measure_ac97_clock: measured 55460 usecs
[17179595.884000] intel8x0: clocking to 48000
[17179595.884000] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
[17179595.884000] ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKE] -> GSI 5 (level, low) -> IRQ 5
[17179595.884000] ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
[17179596.092000] eth1: Radio is disabled by RF switch.
[17179596.392000] lp: driver loaded but no devices found
[17179596.448000] SCSI subsystem initialized
[17179596.460000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179596.460000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179596.484000] Adding 1052216k swap on /dev/disk/by-uuid/91e0f3cf-b73f-4cff-b834-45a2f44441a2. Priority:-1 extents:1 across:1052216k
[17179596.600000] EXT3 FS on hda5, internal journal
[17179596.872000] NTFS driver 2.1.27 [Flags: R/O MODULE].
[17179596.944000] NTFS volume version 3.1.
[17179597.336000] NET: Registered protocol family 17
[17179601.564000] ACPI: AC Adapter [ADP1] (on-line)
[17179601.604000] ACPI: Battery Slot [BAT1] (battery present)
[17179601.628000] ACPI: Power Button (FF) [PWRF]
[17179601.628000] ACPI: Lid Switch [LID0]
[17179601.628000] ACPI: Sleep Button (CM) [SLPB]
[17179601.628000] ACPI: Power Button (CM) [PWRB]
[17179602.012000] ibm_acpi: ec object not found
[17179602.044000] pcc_acpi: loading...
[17179602.192000] ACPI: Video Device [NVID] (multi-head: yes rom: no post: no)
[17179605.812000] apm: BIOS not found.
[17179609.644000] Bluetooth: Core ver 2.8
[17179609.644000] NET: Registered protocol family 31
[17179609.644000] Bluetooth: HCI device and connection manager initialized
[17179609.644000] Bluetooth: HCI socket layer initialized
[17179609.804000] Bluetooth: L2CAP ver 2.8
[17179609.804000] Bluetooth: L2CAP socket layer initialized
[17179609.844000] Bluetooth: RFCOMM socket layer initialized
[17179609.844000] Bluetooth: RFCOMM TTY layer initialized
[17179609.844000] Bluetooth: RFCOMM ver 1.7
[17179619.912000] NET: Registered protocol family 10
[17179619.912000] lo: Disabled Privacy Extensions
[17179619.912000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[17179619.912000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[17179619.912000] IPv6 over IPv4 tunneling driver
[17179701.344000] usb 4-2: new high speed USB device using ehci_hcd and address 4
[17179701.476000] usb 4-2: configuration #1 chosen from 1 choice
Bus 004 Device 004: ID 132a:1502
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x132a
idProduct 0x1502
bcdDevice 0.00
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Bus 004 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 12
Bus 003 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Bus 002 Device 002: ID 062a:0000 Creative Labs
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x062a Creative Labs
idProduct 0x0000
bcdDevice 0.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 52
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 10
Bus 002 Device 003: ID 08ff:5711 AuthenTec, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 8
idVendor 0x08ff AuthenTec, Inc.
idProduct 0x5711
bcdDevice 0.00
iManufacturer 0
iProduct 1
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 0
Bus 002 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Foro 
Favoured: 0
